Phytochemical profiling and evaluation of modified resazurin microtiter plate assay of the roots of Trillium govanianum

Abstract

Trillium govanianum Wall. ex D. Don (Melanthiaceae alt. Trilliaceae), is native to the Himalayas. The present study, for the first time, was undertaken to explore the antimicrobial potential, to determine the minimum inhibitory concentration (MIC) values of the methanol extract of the roots of Trillium govanianum and its solid phase extraction (SPE) fractions by using resazurin microtiter assay (REMA) against Gram positive and Gram negative bacterial registered strains and to carry out phytochemical analysis. The remarkable amount of gallic acid equivalent phenolic and quercetin equivalent flavonoid content was manifested by MeOH extract (20.27?±?3.03?mg GAE/g DW and 9.25?±?0.50?mg QE/g DW respectively). The GC/MS analysis revealed the presence saturated and unsaturated components. Considerable level of antibacterial potential against Gram-positive bacteria (MIC: 2.5-0.009?mg/mL) than against Gram-negative bacteria (MIC: 2.5-0.165?mg/mL) were observed. The use of microtiter plates has the advantage of lower cost, fast and quantitative results.     

An approach of dynamic mesh adaptation for simulating 3‐dimensional unsteady moving‐immersed‐boundary flows

In this paper, we present an approach of dynamic mesh adaptation for simulating complex 3‐dimensional incompressible moving‐boundary flows by immersed boundary methods. Tetrahedral meshes are adapted by a hierarchical refining/coarsening algorithm. Regular refinement is accomplished by dividing 1 tetrahedron into 8 subcells, and irregular refinement is only for eliminating the hanging points. Merging the 8 subcells obtained by regular refinement, the mesh is coarsened. With hierarchical refining/coarsening, mesh adaptivity can be achieved by adjusting the mesh only 1 time for each adaptation period. The level difference between 2 neighboring cells never exceeds 1, and the geometrical quality of mesh does not degrade as the level of adaptive mesh increases. A predictor‐corrector scheme is introduced to eliminate the phase lag between adapted mesh and unsteady solution. The error caused by each solution transferring from the old mesh to the new adapted one is small because most of the nodes on the 2 meshes are coincident. An immersed boundary method named local domain‐free discretization is employed to solve the flow equations. Several numerical experiments have been conducted for 3‐dimensional incompressible moving‐boundary flows. By using the present approach, the number of mesh nodes is reduced greatly while the accuracy of solution can be preserved.     

Local linear convergence analysis of Primal–Dual splitting methods

In this paper, we study the local linear convergence properties of a versatile class of Primal–Dual splitting methods for minimizing composite non-smooth convex optimization problems. Under the assumption that the non-smooth components of the problem are partly smooth relative to smooth manifolds, we present a unified local convergence analysis framework for these methods. More precisely, in our framework, we first show that (i) the sequences generated by Primal–Dual splitting methods identify a pair of primal and dual smooth manifolds in a finite number of iterations, and then (ii) enter a local linear convergence regime, which is characterized based on the structure of the underlying active smooth manifolds. We also show how our results for Primal–Dual splitting can be specialized to cover existing ones on Forward–Backward splitting and Douglas–Rachford splitting/ADMM (alternating direction methods of multipliers). Moreover, based on these obtained local convergence analysis result, several practical acceleration techniques are discussed. To exemplify the usefulness of the obtained result, we consider several concrete numerical experiments arising from fields including signal/image processing, inverse problems and machine learning. The demonstration not only verifies the local linear convergence behaviour of Primal–Dual splitting methods, but also the insights on how to accelerate them in practice.     

Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.     

Definition and detection of data-based uniqueness in evaluating bilinear (two-way) chemical measurements

Multivariate curve resolution methods, frequently used in analyzing bilinear data sets, result in ambiguous decomposition in general. Implementing the adequate constraints may lead to reduce the so-called rotational ambiguity drastically, and in the most favorable cases to the unique solution. However, in some special cases, non-negativity constraint as minimal information of the system is a sufficient condition to resolve profiles uniquely. Although, several studies on exploring the uniqueness of the bilinear non-negatively constrained multivariate curve resolution methods have been made in the literature, it has still remained a mysterious question. In 1995, Manne published his profile-based theorems giving the necessary and sufficient conditions of the unique resolution. In this study, a new term, i.e., data-based uniqueness is defined and investigated in details, and a general procedure is suggested for detection of uniquely recovered profile(s) on the basis of data set structure in the abstract space. Close inspection of Borgen plots of these data sets leads to realize the comprehensive information of local rank, and these argumentations furnish a basis for data-based uniqueness theorem. The reported phenomenon and its exploration is a new stage (it can be said fundament) in understanding and describing the bilinear (matrix-type) chemical data in general.     

Synthesis,spectroscopic studies,thermal analyses,biological activity of tridentate-coordinated transition-metal complexes [M(L)X2] and crystal structure of [ZnBr2(2,6-bis(tert-butylthiomethyl)pyridine)]

A new terdentate acyclic pincer ligand, 2,6-bis(tert-butylthiomethyl)pyridine (tbtmp), was synthesized and reacted with several complexes of iron, zinc, nickel, cobalt, and copper. The ligand and its coordination compounds were characterized using elemental analysis, infrared, ¹H- and ¹³C-NMR-spectroscopy, thermal analyses, plus—for the Zn complex—single-crystal X-ray diffractometry. The structure of [Zn(L)Br₂] was solved in the tetragonal crystal system, chiral space groups P4₁2₁2 and P4₃2₁2 (No. 92 and No. 96, a = 947.2(1) pm, c = 2265.2(5) pm), revealing five-fold coordination of the metal atoms. According to spectroscopy, all complexes share the same coordination environment around the metal atoms, consisting of two halide anions and a sulfur-methylene-pyridine-methylene-sulfur entity; tbtmp acts as a tridentate ligand with the pyridine N atom and both tert-butylthio S atoms coordinating to the metal ions (NS2). The analysis results indicate that the metal ions are coordinated as distorted pseudo-bipyramids, LMX₂, with the chelate ligand meridionally arranged. One of the complexes contains ethanol as an additional ligand, resulting in a pseudo-octahedral coordination sphere [Ni(L)Cl₂EtOH]. The latter was obtained in the form of green crystals, which turn into a red powder with loss of the ethanol molecule. Fe (III), Co(II), Ni(II) and Cu(II) metal complexes [M(L)Cl₂] were screened for their antibacterial activity against B. subtilis G(+) and Escherichia coli G(−) bacteria, and fungus (Candida albicans and Aspergillus flavus).     

LC‐MS/MS analysis of Gegen Qinlian Decoction and its pharmacokinetics after oral administration to rats

A liquid chromatography‐tandem mass spectrometry (LC‐MS/MS) method was developed and validated for the simultaneous determination of 12 constituents of Gegen Qinlian Decoction (GQD), namely puerarin, daidzein, baicalin, wogonoside, wogonin, liquiritin, liquiritigenin, berberine, jatrorrhizine, palmatine, coptisine and glycyrrhetic acid, in rat plasma. The plasma samples were spiked with the internal standard (IS) carbamazepine acidified with HCl and extracted by liquid–liquid extraction with ethyl acetate. Chromatographic separation was achieved on a Shiseido Capcell PAK C₁₈ column utilizing a gradient elution profile and a mobile phase consisting of (A) 0.1% formic acid in water and (B) acetonitrile. Detection was performed in the multiple reaction monitoring mode using electrospray ionization in the positive ion mode at a flow rate of 0.3 mL/min and a run time of 8 min. All of the calibration curves gave good linearity (r > 0.9930) over the concentration range from 0.6–360 to 16.2–9720 ng/mL for all components. The intra‐ and inter‐day precisions were <15.0% in terms of the relative standard deviation, and the accuracies were within ±13.7% in terms of the relative error. The method was successfully applied to investigate the pharmacokinetics of the major active compounds of Gegen Qinlian Decoction after its oral administration to rats. Copyright © 2014 John Wiley & Sons, Ltd.     

Target cell extraction coupled with LC‐MS/MS analysis for screening potential bioactive components in Ginkgo biloba extract with preventive effect against diabetic nephropathy

A rapid and useful approach for screening potential bioactive components in Ginkgo biloba extract (GBE) with preventive effect against diabetic nephropathy (DN) was developed using mesangial cells extraction coupled with high‐performance liquid chromatography tandem mass spectrometry (LC‐MS/MS) analysis. Mesangial cells were first divided into two groups according to their treatments with high glucose or high glucose plus GBE. After incubation for 4, 8, 12, 16, 24 and 48 h, the cells were harvested and extracted with 40% acetic acid in water before LC‐MS/MS analysis. Then, 19 compounds and five metabolites were found to selectively combine with mesangial cells. Notably, compounds including quercetin and rutin were identified or tentatively characterized according to the results of retention time and MS spectra, which is highly consistent with our previous reports that quercetin and rutin are potent protective agents against glomerulosclerosis in DN. Therefore, all these results indicate that target cell extraction coupled with LC‐MS/MS analysis can be successfully applied for predicting the bioactive components in GBE with preventive effect against DN. Copyright © 2014 John Wiley & Sons, Ltd.     

基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.